Bolsey PH-324A Camera, 35 Model B Special & B3

Composition of my Bolsey 35 B Special, PH-324A and B3 cameras

I've always been a fan of Bolsey cameras, as I've written about them in the past. Many of their models have a highly unusual appearance. Their 35mm cameras look somewhat bulbous from the top, with an odd three-sided removable back door. Yet, they seem to fit in the hand nicely thanks to their quirky form factor.

I've owned many Bolsey cameras over my collecting career, from the twin-lens Bolsey-Flex Trio and Bolsey 8 (both still and movie cameras) to the oddly shaped twin-lens 35mm Bolsey C model. But today I'm writing about their more common 35mm rangefinders—with the fun exception that they come in different colors.

One thing I've noticed is that the red logo Bolsey button on top of the camera is usually missing. I'd guess more than half the ones I've seen have lost this red button, likely popping off at some point in the camera's life. I've had some with and some without, so I generally look for and purchase them with the button intact, unless it's a truly "special" camera.

All three cameras I'm looking at today are based on the Bolsey B in terms of shape and most features. Due to my love for colored cameras, I couldn't resist putting this trio together—mainly for the fun of photographing them side-by-side and seeing what I could come up with for my lead photo.

The Bolsey "Special" is the oldest in my collection, and I purchased it online off eBay many years ago. The thought of adding a red Bolsey to the shelf was a huge plus for me. When I received it and saw it was in great physical shape, I was thrilled. Finding out the shutter and transport actually worked was just the frosting on the cake.

However, it wasn't until I finally pulled it off the shelf, loaded it up, processed the film, and saw the results that I realized there was a major flaw (see the images in the "Results" area). While the rangefinder worked as it should and the pressure plate was intact, the images were incredibly out of focus. I guess one of the lens elements is missing, or something is so out of whack that it ruins the focus. The back looks perfectly fine, so I'm at a loss.

After some research, I learned that some Bolsey "Special" cameras were made for microscopes and scientific purposes. Maybe this lens was specifically calibrated for extreme close-up work? But then again, the rangefinder worked perfectly for distance. It's a mystery.

I bought the second camera, the Bolsey B3, at an antique store in a neighboring town about three years ago. I was walking through the basement section when I came across a booth with a few cameras, and there sat this grey B3. The chrome was tarnished, and the shutter was stuck open, but the top was clean, and it was grey—a color I hadn't seen on a Bolsey before. The price was only a few dollars, so even though the shutter wasn't working, I figured it would make a fantastic display piece alongside my other Bolseys.

The newest Bolsey to join my collection is the PH-324A. This military camera was made for, and used by, the U.S. Signal Corps. This olive-drab camera features a stark black finish and a bold red "Bolsey" on the faceplate. It was part of a lot I bought at an auction house a few months ago.

While I always enjoy finding different colored versions of cameras, the stigma of a "military" model didn't initially excite me. That's possibly because the high prices they usually command typically turn me off—and keep them out of my budget! But the striking black finish on this one really won me over.

After processing the disappointing roll from the Bolsey Special, I loaded some film into the PH-324A and took it outside for a spin. Thankfully, this roll turned out much better, which you can see in the "Results" section below.

History:

The history of Bolsey cameras is inextricably linked to the brilliant and prolific mind of its founder, Jacques Bolsey. Born Yakob Bogopolsky in Kiev in 1895, he first made his mark on the photographic world in Switzerland during the 1920s. There, he designed the legendary Bolex 16mm motion picture camera, a revolutionary piece of equipment that helped democratize filmmaking for generations of operators. He also laid the mechanical groundwork for the Swiss Alpa-Reflex 35mm camera in the late 1930s before emigrating to the United States to escape the onset of World War II.

Bolsey Advertisment

During the war, Bolsey worked extensively with the U.S. government, designing durable, high-precision combat cameras for both aerial and ground photography. When peacetime arrived, he leveraged this military engineering experience to enter the booming consumer market. In 1947, he founded the Bolsey Corporation of America in New York and introduced his first major consumer camera, the Bolsey Model B.

The Bolsey Model B was a compact 35mm rangefinder featuring a distinctively heavy, cast-aluminum body. It possessed a uniquely rugged feel—a direct byproduct of Bolsey's wartime designs. Equipped with a fixed Wollensak Anastigmat 44mm f/3.2 lens and a split-image rangefinder, the Model B was both mechanically capable and affordable for the post-war middle class.

The company quickly iterated on this early success. The subsequent Model B2 added double-exposure prevention, while the exceptionally quirky Model C, introduced around 1950, stands out as one of Bolsey's most eccentric designs. The Bolsey C was an unusual hybrid: it functioned as a standard 35mm rangefinder but also integrated a twin-lens reflex (TLR) viewfinder on the top of the body. This let photographers look down into a ground-glass screen to focus, offering an alternative to the traditional eye-level viewfinder.

Later models, like the Bolsey B22 and the Jubilee (introduced in 1953 and 1955, respectively), featured a proprietary "Set-O-Matic" system. This mechanical innovation coupled aperture control directly to the focus mechanism, removing the mathematical guesswork from early flash photography.

Despite their mechanical durability and innovative features, Bolsey cameras suffered from inconsistent quality control in their external finishes. The metal plating on many camera bodies tended to deteriorate or pit quickly. By 1956, facing intense competition from domestic manufacturers like Kodak, as well as highly sophisticated new imports from Japan and Germany, Bolsey ceased camera production and sold his business interests to the Wittnauer Watch Company.

Jacques Bolsey passed away in 1962. Today, his legacy survives not only in the revered Bolex cinema cameras but also in the quirky, durable Bolsey 35mm rangefinders that remain fascinating artifacts of mid-century photographic engineering.

My Camera:

For this section, I'll focus on the PH-324A. The red "Special" is very similar to the PH-324A, while the Bolsey B3 is different mechanically and has some aesthetic differences, too.

The Bolsey 35mm models are sturdy and compact, coming in at 4.25" across, 2.5" tall, and 2.5" deep, weighing 14.9 ounces without film. My camera has a Wollensak 44mm f/3.2 Anastigmat lens, and the serial number on my PH-324A is 95012.

Looking along the top, you'll find just the rewind knob on the left. The middle of the PH-324A features the information plate with the Bolsey logo, reading: "Signal Corps. U.S. Army, Camera PH-324A," along with the contract name and "Bolsey Corp. of America." On the top right is the winding knob to advance the film. There's a helpful arrow indicating the turning direction, along with the instruction to "Lift slightly and Wind." Right below the winding lever is the frame counter.

Top view of the Bolsey PH-324A camera

On the back of the camera are two holes for the viewfinder. The left is the standard finder used to frame your image, and the right is a split-image rangefinder used for focusing. For me, they are a little difficult to use, but I think that's because of the eye surgery I had over a year ago and simply getting more accustomed to using my left eye to focus.

Moving to the front, the viewfinders are at the top. Down by the lens, you focus by sliding a large tab on the left side (as you hold the camera). On the PH-324A, there is a red dot and a slight indent just past the 12-foot mark. This is designed for hyperfocal focusing. Similar to how an Instamatic works, if you set the camera's focus to this point and use a small aperture in normal sunny conditions, your depth of field will keep everything from approximately 5 feet to infinity in sharp focus.

Above the lens are the shutter speeds, which range from 1/200 down to 1/10, along with "B" for Bulb and "T" for timed exposures. The 1/100 shutter speed is printed in red. You turn the outer knurled ring to select your desired speed.

Below the lens are the aperture settings, ranging from f/3.2 to f/22. Set these by sliding the small arrow to match your lighting conditions. The f/8 mark is also printed in red. When you set the camera to 1/100, f/8, and focus on the red dot (around 15 feet), the camera is extremely easy to operate because all the primary settings are color-coded in red.

The shutter release is located around the lens assembly in the ten o'clock position. Just press it down to fire the shutter.

The bottom of the camera has the film door release. Flip the lever to "open," then slide the back off to expose the loading area. From there, you load it as you would any standard 35mm camera.

After taking a photo, you must follow the instructions engraved on the film advance knob. I didn't notice this when I first loaded the camera. The winding gears felt stuck, and I actually tore some of the sprockets right off the film. To advance the film properly,  lift the winding knob slightly, then start turning.

Lifting the knob releases the internal lock on the advance gear, allowing you to wind to the next frame. Without lifting it, you'll tear the sprocket holes just like I did before consulting the manual. When it's time to rewind the film into the cassette, there is no release button for the drive gears. You wind the rewind knob in the direction of the arrow, and the film pulls smoothly back into the cassette.

Results:

Loading up some expired Plus-X film from 1976 (which is still great film, by the way), I took a walk through my neighborhood and captured several of my usual test views.

Here are a couple of the images taken with the red "Special." The final few—and much sharper—images are from the PH-324A, which did a considerably better job!

Conclusion:

The Bolseys are incredibly fun cameras to shoot with and remain some of my favorites in my collection. They are even more fun to use once you read the instructions and learn how to advance the film without tearing the sprocket holes!

The focus was surprisingly easy to nail, even for an old guy using his left eye. The viewfinder was clear, the shutter speeds seemed accurate, and the lens was sharp, producing some genuinely nice images despite the larger grain structure of the vintage Plus-X film.

Thank you for taking the time to read about some of the Bolsey cameras from my collection.

Overall, my experience with these cameras was very positive. While a slightly larger finder window would be nice, I do love shooting with a compact camera every once in a while. I've always felt that Bolsey cameras were well-built, quirky, and an absolute joy to use.

Are you interested in other vintage gear? Here are some of my other Camera Reviews.

Check out my Cuny's Camera Collection YouTube channel, where I am putting together video overviews of the cameras I write about. Be sure to subscribe and like the channel, too!

Cuny's Cameras and Photos is my online eBay store, where you will find some of the cameras I have reviewed, along with a wide range of other cameras, lenses, and items from my collection that I am thinning out.

Until next week, please be safe.

Lumiere LuxBox (Ver. 2)

My Lumiere LuxBox camera.

I was drawn to the Lumiere LuxBox, a camera I bought at a Paris flea market 20 years ago. Among other simple cameras, its unique shape and brown color caught my eye.

 When I picked up the camera, I saw it was in great shape. The two-speed shutter worked, there were two aperture settings on the lens, and the crinkle-finished metal body looked nice. I liked the lens pattern and the riveted nameplate on the front. The design reminded me of Ferrania Rondine cameras from Italy. You can unlock the film insert and remove it from the body from the side, unlike many other box cameras. The solid metal body was another thing I liked.

 After a short negotiation with the vendor, we agreed on a price. I paid, put the camera in my backpack, and moved on to the next tables at the market. Other than a group of fabulous glass negatives taken in the French countryside during the 1920s, the Lumiere LuxBox was the only camera purchased at the Paris flea market on this day.

 About 20 years later, and just a few weeks ago, I was searching for a camera to write about. The Lumiere LuxBox caught my attention again. I was somewhat familiar with the French Photographic Company, Lumiere, as I have previously written about another one of their wonderful miniature camera, the Super ELJY camera.

 Although I thought last week’s blog would be my final post of the year, its simplicity inspired me to shoot a roll of film and share a short article. So here I am, telling you about this relatively simple, ordinary, oddly shaped box camera from France, made in the early 1950s.

History:

 To give some background, Lumière was a pioneering French camera company founded by Charles-Antoine Lumière in Lyon in the late 19th century. The company became best known for the achievements of Auguste and Louis Lumière. Their innovations in motion-picture technology and color photography helped define early cinema and modern photographic materials.

Lumiere Advertisment

 The Lumière enterprise began as a manufacturer of photographic plates. Louis Lumière invented a highly sensitive "blue label" dry plate at the age of 17. This plate enabled much shorter exposure times and quickly became a commercial success. The company soon built a large factory in Lyon's Monplaisir district and became one of Europe’s major suppliers of photographic materials by the mid‑1890s.

 After their father saw Edison’s Kinetoscope in Paris, Auguste and Louis developed the Cinématographe, a lightweight device that could record, print, and project movies. Patented in 1895, it used perforated film and a claw mechanism, making it more practical than other systems. This led to the first public film screenings, including “Workers Leaving the Lumière Factory.” Imagine how exciting that was for photography fans then.

 By the early 1900s, Lumière stopped making films and focused on photographic technology, especially color processes. In 1903, they patented Autochrome Lumière, a color plate process that used dyed potato-starch grains. It was introduced in 1907 and became the first major color system widely used through the 1930s. Learning about these innovations makes me appreciate their cameras even more.

 Lumière began manufacturing cameras in the late 1920s and produced various models until about 1961. The company was purchased by Swiss firm Ciba in 1961 and later became part of Ilford France. For collectors like me, the Lumière name still stands out in early photography and cinema. sures 4.5 inches tall (including the eye-level finder), 4.25 inches deep, and 3 inches wide (including the film advance knob). It weighs 14.2 ounces without film loaded. 

My Camera:

 The LuxBox was introduced in 1933 and discontinued in 1937. It’s a classic box-style camera that takes 6x9cm photos on 120 film. The camera has shutter speeds from 1/75 to 1/25, plus "T" and "B" settings. It also has a focusable lens and was considered the most advanced box camera of its time.

The LuxBox was reissued from 1952 to 1954, which is when mine was made. It’s an all-metal camera without a leather covering, with a frosted Havana-colored paint finish. There is a small vertical eye-level finder on top for composing your shot. This version takes 6x9cm negatives with 620 film, which is very similar to 120 film but uses a different spool size.

The camera has a simple lens and shutter unit. The shutter provides two speeds: 1/75 (fast) and 1/25 (slow), plus a "B" (bulb) setting for manual exposure holding. There are two fixed-aperture settings at the 4:00 position (when facing the lens): "2" (wider opening for brighter images) and "1" (smaller opening for greater depth of field and less light). A PC flash port at 2:00 allows flash connection. There’s no cable socket for time exposures, so you must hold the shutter release manually for long exposures. The bottom of the camera has a standard tripod socket for stability.

To load film, find the locking button on the left. Slide it up to unlock, then pull the right side away from the body. Load film as with other box cameras.

 Move the empty take-up spool from the bottom compartment to the top so it can collect the unspooled film. Place the new roll of film into the bottom compartment, ensuring the ends of the spool fit securely into the peg slots. Pull the leader paper over the guide wheels and insert it into the empty spool’s slot. Turn the winding knob until the word "start" appears on the backing paper. Slide the film chamber back into the camera body and lock it in place with the button. Then, open the red window cover on the camera's back and turn the winding knob until the number "1" appears, indicating that the first exposure is ready.

This camera has a few technical settings.

 Let’s load film and see what results we get.

 

My Results:

 I loaded the camera with a roll of 100 ISO 620 film I keep for cameras like this. I probably should have used 400 ISO film, since it was overcast, though the sun peeked through at times. We took our daughter’s dog to the local dog park for exercise and photos.

 Here are some of the results from our walk at the Dog Park:

Conclusion:

 The camera is fun to use thanks to its extra shutter controls. As someone who likes the 6x9 cm format, I enjoy capturing a larger area in each photo.

 The main downside for me was the tiny viewfinder window. A standard waist-level finder would have made the camera easier to use and more like the original 1930s model.

 I think this model was brought back in the early 1950s to cut costs but still offer decent image quality. Although I may not use it again, testing it for this article let me revisit why it stood out to me in Paris, and now it has a place on the shelf among my other colored cameras.

 Feel free to check out my other camera reviews.

 If you’re interested in any of the cameras I’ve reviewed, you might find them in my eBay store, Cuny’s Cameras and Photos. I have lots of odd and unusual photo items for sale.

 Thanks for taking a few minutes to read about this mid-century French camera made after WWII.

 Until my next review, take care.

Voigtlander Prominent 35mm

My father-in laws Voigtlander Prominent

I'm unsure if I'll be able to get another posting out before the beginning of 2026, since Christmas and New Year's fall on the day I generally publish my reviews. Since this might be the final post for 2025, I wanted to make it a special review. 

 Special in the sense that, while the Voigtländer Prominent is an outstanding camera, what makes this camera especially special to me is that my father-in-law owned it, so it holds an even greater, much more cherished place in my collection.

 Let me tell you a bit about my father-in-law. He was the oldest of seven children living in a very small town named Sugar Creek, MO, just outside Independence. They were not a wealthy family, as the father worked at the local refinery. I was told that the house was so small that some of the children had to sleep in closets. At 18, he married my mother-in-law, who was only 17 at the time. By the time he was 22 and my mother-in-law was 21, they had three children.

 Soon after they were married, he joined the Army, where they were stationed in Augusta, GA, where my wife and the third child were born.  When my wife was only 6 months old, my father-in-law and the family were transferred to Naples, Italy. With his wife and three young children, my wife moved to Italy.

My father-in-law always had a passion for photography and, from what I'm told, purchased the Voigtländer Prominent while stationed overseas. After their time in Italy,  the family moved back to the USA. At this point, my father-in-law found a local camera store back near Kansas City, where he honed his photographic skills using the Voigtländer Prominent he purchased overseas.

Voigtlander logo and Prominent name on top of the camera.

 After the camera store, he was hired by Procter & Gamble to sell Duncan Hines cake mixes. He climbed the corporate ladder, moving his family with each promotion due to his outstanding managerial and sales skills. All the while, he still had a passion for photography. He was always taking photos of the family and eventually ended his career as a top executive at some of the largest Fortune 500 companies.

 This article is not only about a truly amazing camera, but also an ode to my father-in-law. Someone I looked up to in my career helped me in so many ways and was a warm, loving, generous, and caring individual. He passed away way too early from an auto accident, almost 30 years ago. We still have his Voigtländer Prominent, which he used, and it's in remarkable condition. For the final post, I wanted to write about this truly excellent camera, which means so much to all the family members.

 I've had the opportunity to purchase other Voigtländer prominent cameras, both the original and the Prominent II, with the standard Ultron and Heliar lenses, along with many different lenses and accessories for their cameras. Still, the camera from my father-in-law is off-limits. It will stay in my collection until I'm no longer around.

 I've reviewed other Voigtländer cameras, so I've written about their history in the past. Let me focus on the history of Voigtländer in a specific timeframe: after World War II, when they rebuilt a fantastic camera brand.

Voigtlander Post World War II:

 Voigtländer emerged from the Second World War with its Braunschweig factory largely intact and quickly resumed work under British military oversight, initially dedicating much of its output to Allied reparations until the new West German currency was introduced in 1949. This relatively undamaged industrial base, combined with a strong pre‑war optical tradition, allowed the firm to re‑establish itself rapidly as a key player in the post‑war German camera industry.​

 In the immediate post‑war years, Voigtländer revived and modernized pre‑war designs, adding new anti‑reflection coatings to lenses and continuing large‑format and medium‑format lens production. The company remained under the ownership of the chemicals and photographic‑paper firm Schering AG, which had acquired it in the 1920s, providing financial stability in a challenging economic climate.​

From Voigtlander Catalog Credit: Pacific Rim Camera

 The 1950s became Voigtländer's golden decade, marked by a broad range of high‑quality cameras and lenses that cemented its international reputation. Compact 35mm lines such as the Vito and the more sophisticated Vitessa appeared alongside the professional Prominent 35mm rangefinder. At the same time, optics like the Ultron, Nokton, Apo‑Lanthar, and Heliar established the brand as a leader in lens design. In 1952, Voigtländer introduced the Apo‑Lanthar 105 mm f/4.5, and in 1959, it launched the 36–82 mm f/2.8 Zoomar, one of the first interchangeable zoom lenses for 35mm still photography.​

 In 1956, Schering sold Voigtländer to the Carl Zeiss Foundation, bringing it into the same corporate orbit as Zeiss Ikon while initially keeping manufacturing and sales structures separate. Throughout the late 1950s and early 1960s, Voigtländer expanded into leaf‑shutter SLRs and advanced models such as the Bessamatic and Ultramatic, but the cameras were complex and costly to build. As Japanese manufacturers increased efficiency and undercut prices, Voigtländer's high production costs and conservative designs became major competitive disadvantages.​

 In 1965, Zeiss‑Ikon and Voigtländer's sales operations were combined, but falling sales led to the decision to cease camera production and close the Braunschweig factory on 4 August 1971, affecting over 2,000 employees. The physical works were reorganized as Optische Werke Voigtländer, with shared ownership between Zeiss, Rollei, and the state of Lower Saxony. By 1974, Rollei had taken complete control, continuing to produce lenses and cameras under the Voigtländer brand until its own financial collapse in the early 1980s.

 The trademark then passed through German photo retailers and, from 1999, has been licensed to Cosina in Japan, which uses the historic name on modern manual‑focus lenses and niche film cameras, giving Voigtländer a new life in the era of digital photography.

My Camera:

 My Voigtländer Prominent comes with the standard Ultron 50mm f/2.0 lens. The camera body serial # B 46551, and lens serial # 3782651. With this camera, there is a Voigtländer UV filter that I generally leave on the camera, along with a yellow filter for black-and-white photography, a rectangular metal lens hood, and the fitted brown camera case. The camera is 5.5" wide by 3.5" tall by 3.5" deep, and weighs 2 pounds, 0.8 ounces without film.

 The Voigtländer Prominent has some weight to it, and for me, it feels very comfortable in my hands. Maybe because it resembles an SLR more, like what most people are used to with rangefinder cameras. The camera has a somewhat peculiar layout and is something you'll need to get used to.

When you put the camera to your eye, the viewfinder is on the right side of the camera, which, for many, is different. The majority of cameras have the viewfinder either centered or more to the left than to the right. The focusing ring isn't on the lens, but located on the rewind knob. As you turn the outside of the rewind knob, generally used to rewind the film in the film cassette when you're done with the roll, on the Voigtländer Prominent, it focuses the lens. 

Looking through the viewfinder, the rangefinder is bright, with the yellowed area in the center clearly visible. With your left hand, turn the outer ring of the rewind knob to focus on your subject. Once the image is in focus, take your photo. Under the focus distance is the camera's depth of field guide for the aperture used. 

To take a photo, on the right-hand side of the camera is the film advance lever; wind it clockwise to advance the film. The same motion that advances the film also moves an internal bar that cocks the shutter. The shutter speed dial on the Syncro-Compur shutter is set by turning a ring just in front of the shutter cocking lever. The shutter speeds on this camera go from 1/500 to 1 sec, with "B" for timed exposures. According to the Voigtländer Prominent camera manual, it's best to set the 1/500 shutter speed before winding the camera, which cocks the shutter. You can set any shutter speed once the camera's shutter is cocked, but 1/500's not recommended.

If you want to use the camera's self-timer, it can be manually set by pulling down on the shutter's cocking lever once the camera is cocked. This sets the camera's self-timer to approximately 10 seconds when the shutter release is depressed. The camera's shutter release is the larger button on the top of the camera, just to the left of the film transport knob. Behind the shutter release is the cable release socket for timed exposures.

Top view of Voigtlander Prominent camera

Looking at the lens, the aperture is set by turning the aperture ring in the direction that produces a properly exposed image. On the Ultron 50mm lens, the aperture goes from F/2.0 to F/16. To remove the lens from the body, on the bottom of the lens is a large button you press in; interestingly, you can remove the lens by turning it left or right. Likewise, to put the lens onto the camera body, make sure the large button is on the bottom. You can mount the lens either to the right or left as long as the button end is on the bottom.

 Since the camera utilizes a leaf-style shutter as opposed to the standard focal plane shutter, the flash will sync at any shutter speed, which allows the photographer the ability to control the ambient light with flash much better, and this makes film cameras such as Hasselblad and Rolleiflex cameras ideal for weddings, portraiture, and commercial studio work. On the front of the camera, at the 11:00 position, is the PC sync for flash, along with the flash settings: "X" for electronic flash or "M" for flash bulbs.

To load film into the Voigtländer Prominent camera, on the left side of the camera are two buttons you press to open the camera's back door. Once open, you load the 35mm film just as you would any other 35mm camera. Push up the rewind shaft, drop in the 35mm cassette, and bring the leader over to the camera's take-up spool. Thread the leader into the take-up spool slot and wind the film advance. Make sure the film's sprocket holes are in the drive gears and take up the slack. Before closing the back of the film door, I like to turn the rewind knob to take up the slack in the film cassette, so when I close the back and wind to the first frame, I watch the rewind knob turn to make sure the film is actually moving within the camera.

 Once you close the back door, the frame counter needs to be set manually. To do this, lift up on the winding knob, then turn the camera's frame counter to "F" to give you a couple of turns on the film advance until you get to frame number 1.

When you're done with the roll of film, you'll need to rewind it into the film cassette. The rewind knob has an arrow pointing outward. Push the button outwards, and the rewind handle will pop up. Just below the cable release socket is a small button labeled "R". Press the "R" button to disengage the transport gear, then turn the rewind knob clockwise to rewind the film into the film cassette. Once the film is rewound, open the camera back, process the film, and reload the camera with more film. 

 

My Results:

 I loaded the Voigtländer Prominent with a roll of 200-speed film and took one of our dogs to the local dog park to get the pooch some exercise, taking photos of a different area than walking through the neighborhood as I usually do.

 Here are some photos from the local dog park and the shadows on my back patio on a beautifully sunny day in the Portland Area in December. It wasn't a typical December day in this area, so I wanted to make the most of it.

Conclusion:

 I really love this camera. The images are incredibly sharp, and this camera gives Leica and Contax a run for their money. It's exceptionally well-built, the lenses are tremendous, and I like the camera's size and weight.

 The system's weakest link is its lack of lenses, and for many, the camera's focus is a drawback. I've read that people don't like having the viewfinder on the right side, which makes it more challenging for them to use the camera. I don't find it annoying, as others do.

 Here's a link to my other Camera Reviews.

 If you're looking for a camera, lens, or other photo oddity, please stop by my eBay store, Cuny's Cameras and Photo. If there's something that interests you, mention my blog, and I'll offer you a discount.

 Thank you for taking a few minutes from your day to read about this excellent camera with extremely sharp lenses. If I don't post another review before the end of the year, please have a Happy Holiday and a fabulous New Year.

 Until next time, please be safe.