Coronet Cameo

My Coronet Cameo camera

It wasn't until I had been collecting cameras that I developed an interest in miniature and subminiature cameras. One of my earliest recollections of liking small miniature cameras was when I became a sales representative for a well-known Swiss large-format camera company (Sinar) and traveled to Sacramento to visit a store that displayed many different miniature and subminiature cameras at the cash register.

 I fondly remember spending time looking at the display, thinking many of the cameras seemed so odd and unusual, which is something I'm always looking for in what I collect. When I asked the owner of the store if any of the cameras were for sale, and his reply was a swift and hardy "no", in my mind, it triggered a need to find out more about this whole new world of cameras I was aware of, but had no interest in collecting.

 While I don't have a large collection of miniature and subminiature cameras, the ones I do have have a special place in my collection because they are all very unique. I have the majority of the miniature and subminiature collection on my desk, which I'm at the majority of the time I'm in my office, or what I call my camera oasis. It's the one room in our house where I can do what I want, within reason. Another terrific part of the collection is that they don't take up much room, so I have many of them in a small area that reminds me of the display at the camera store I went to well over 30 years ago.

 I came across the Coronet Cameo camera on a trip to London about two to three years ago. For me, one of the main objectives of the trip was to visit Portobello Road to see some of the camera and photo stalls we had visited on a previous trip to London many years earlier. When my wife and I visited the outdoor market, I found that things had changed, and many of the vendors only showed up on weekends. This was a massive disappointment for me, especially since my wife and I were leaving on Saturday afternoon.

Coronet Cameo size comparison.

 The main person I was to meet was Juliano of Cameras London, who shows his cameras only on Saturday. Somehow, I convinced my wife that I would take the bus to Portobelo Road and back in time for us to go to the airport. 

 As I took the bus to Portobello Road that Saturday morning, I remember I needed to be mindful of the time and hurry. I arrived early as Juliano was still setting up. He had a fantastic display of cameras and some negatives. There were several cameras I wanted to purchase, one being an Ilford Advocate, which you can read about. He said he had a cleaner version and would ship it to me. 

I got together a small group of cameras, and just before I paid him, I saw the Coronet Cameo. It was in poor condition, but it was odd and unusual, so I threw it into the pile. We made a fair bundle price for the items, including the Advocate and Cameo camera. I paid him for the items, put the cameras in my backpack, and made my way back to the hotel. We had plenty of time to make it to the airport.

History:

 The Coronet Camera Company was a significant English camera manufacturer, founded in 1926 in Birmingham, England, by Frederick W. Pettifer. The company began at 48 Great Hampton Street, Aston, focusing on producing an inexpensive line of cameras for the mass market. Their early focus was on simple box and folding cameras.

Photo of old Coronet building depicted from Historic Camera website

 A key aspect of Coronet's operations was its utilization of local Birmingham businesses. They partnered with the British Optical Lens Co. for lenses and, notably, with Edwin Elliott, a local plastics manufacturer, who fabricated molded plastic cameras for them. This collaboration led to popular pre-war models, including the small and stylish Coronet Midget and the Coronet Vogue, which were often made from colored Bakelite. By 1933, the company had reportedly sold a remarkable 510,000 cameras.

 The company became Coronet Ltd. in 1946. After World War II, the company specialized in low-cost, molded-plastic cameras. Due to French import restrictions, Coronet formed a partnership with the French company Tiranty of Paris. This collaboration led to several Coronet models, such as the Rapide, being manufactured in France, sometimes using Boyer lenses, to bypass trade barriers. Coronet also produced accessories and its own brands of film, including Corochrome.

 The company continued to manufacture cameras from its Birmingham headquarters (later located at 308-310 Summer Lane) until it finally ceased operations in 1967. Over its four-decade history, Coronet played a vital role in making photography accessible to the public by providing thousands of simple, affordable cameras, many of which remain popular collector's items today.

My Camera:

 This portion of the blog will be sparse, as there's not much to this camera. The Coronet Cameo camera is small and will almost fit into a 35mm film container. It's 2" wide by 1.5" deep and 2" tall with the front viewfinder extended and only 1.25" tall when it's retracted. The camera only weighs 1.6 ounces. The Cameo has a fixed 25mm F/11 Meniscus lens and a single shutter speed range of 1/25-1/50, with the shutter release on the right side of the camera body.

The camera is made from plastic and was manufactured between 1948 and 1952.  Coronet attempted to revive the success of the Pre-War Midget camera, which was highly successful for the company at the time.

 The Coronet Cameo takes a roll of 16mm film and produces six 12mm x 18mm negative-sized images per roll. The camera loads and winds like any other roll film camera, with the unexposed film loaded on the left and the leader threaded into the take-up spool on the right via the film winding lever.

The back of the camera is held in place by two clips on the right side of the camera. To open the back, lift it from the two clips; it will open, exposing the film chamber. Unfortunately, my camera, like many Coronet Cameo models, is warped, and the back doesn't fit properly to the body.

 A sliding front viewfinder can be pulled up, and when the rear viewfinder is lifted on the back of the camera, it exposes the red window displaying the frame number of the image you'll be taking on the roll of film.

My Results:

 Unfortunately, there is no longer film for this camera, and with the warped camera back, I wasn't able to take photos with it.

 

Conclusion:

 As I was taking photos of the Coronet Cameo, I had an empty 35mm film tube and tried to see if the camera would fit inside it, but it's just a tad too big.

 The Coronet Cameo camera is sitting right next to my Whittaker Micro 16 Pixie camera, which I considered writing about for this blog post. Still, I'll leave that camera for another day. I do enjoy all the miniature and subminiature cameras in my collection; it just took me a few years of collecting them to appreciate them for what they are.

 Thank you for taking the time out of your day to read about this small plastic camera from about 75 years ago. I'm sure many people owned and enjoyed them when they were made.

 If you're interested in reading about other cameras I've reviewed, here's a link to my other Camera Reviews.

 I also have a store on eBay, Cuny's Camera and Photos, where I sell items I've reviewed, as well as many other camera oddities.

 Until next week, please be safe.

Eho Baby Box camera

My Eho Baby Box camera

During my search for cameras, I found many of the very common black folding or box Kodak cameras, as well as the plentiful Argus C3 and Polaroid cameras. However, it's rare to come across something that sparks an interest. I can't define the feeling very well, but when you attend a Flea market or Garage sale and walk up to a table to see something you like or haven't seen before. It's a surprise, and you get a tiny rush from it.

 That's what happened when I first saw the Eho Baby Box camera. I was at a Flea market probably 20 years ago, and a person had a cloth on the ground with several cameras on it. I visually scanned through the lot and found the regular Kodak box, folding and Polaroid cameras, but something didn't make sense when I peeked behind one of the cameras.

 I could see the top of the camera, which had a small handle on it. I thought it was part of another camera, but as I moved a bit, I could see it was a separate camera itself. Thinking, that's interesting, I went in to have a closer look, and that's when I saw the Eho Baby Box camera.

 It really piqued my interest, as I hadn't seen this manufacturer's baby camera before. I've seen and owned the Baby Zeiss box camera, but the squareness and manufacturer were new to me at the time. Picking it up and playing with it, the camera was in clean condition, and the shutter was working, at least most of the time. The camera even had an intact strap with the maker's name on it, which I always prefer.

 Since the camera had a strap and a somewhat working shutter, I wanted to know what the seller wanted for it, so when I asked, the seller said $5.00. Being a person who likes to haggle on price,  I had to ask if he would take $3.00, which he did. I paid the seller the money for the camera, and I was thrilled to have a new addition to my camera family, especially since I discovered a camera manufacturer I wasn't aware of, and for such a small and cute camera.

History:

 Eho-Altissa was a German camera manufacturer with a rich history tied to the evolution of photographic technology in the 20th century. The company originated in 1892 in Leipzig under Richard Knoll as "Photo Spezialhaus" and began repairing and building its own photography equipment from 1904 onwards. In 1910, the operation relocated to Dresden, a hub for Germany's camera production. By 1927, ownership was transferred to Emil Hofert, who renamed it "Eho" after his initials.

 By the early 1930s, the company was manufacturing box cameras, known for their simplicity and reliability, and often rebranded for warehouse and supplier stores under various names. The mechanician Karl Heinrich Altmann designed the notable Altissa Box camera line, which featured an eye-level viewer, differentiating it from other box cameras of the era. Several stereo and twin-lens reflex (TLR) models followed, including the Altiflex in 1937, a notable reflex camera of its time.

Ad for Eho Baby Box camera

 In 1939, the company introduced its Altix series of compact 35mm viewfinder cameras, marking the beginning of a legacy that lasted nearly two decades. The Altix models were key innovations for Eho-Altissa, and their popularity solidified the company's reputation for offering affordable, high-quality cameras with reliable mechanics.

 Throughout its development, the company underwent several renamings. In 1931, it became EHO-Kamerafabrik GmbH. During and after World War II, it transitioned to Amca Werk Berthold Altmann (1940). Altissa Camera Werk (1941), and finally, in 1952, VEB Altissa Camera Werk was nationalized under the East German state.

 World War II severely affected Eho-Altissa; its Dresden factory was destroyed during Allied bombing raids. Nevertheless, the company was revived post-war, with camera production resuming by 1947. The firm remained small enough to avoid early state intervention but was eventually nationalized in 1959, merging with VEB Kamera- und Kinowerke, which was later incorporated into VEB Pentacon.

Camera output ceased in 1961. Notably, the Altix VI model continued to be produced briefly under license in Sarajevo, Yugoslavia, using equipment from the shuttered factory.

 Eho-Altissa produced renowned models such as the Altissa Box series, Altiflex, and Altix, and supplied rebranded products to European photo retailers. Its story reflects the broader turmoil and adaptability of the German camera industry in the wake of economic and political change throughout the 20th century.

My Camera:

 The Eho Baby Box camera is very small, measuring 2 5/8" tall by 2 3/8" wide and 2 3/8" deep, so almost a perfect cube, and weighing only 6.8 ounces. This is one of the smallest, if not the smallest, box cameras I have that still accepts a standard 127-sized roll film, which was common for the time the camera was manufactured. The camera features dual red windows on the back, allowing it to produce 16 3x4cm-sized negatives on a roll of film.

The camera was made between 1932 and 1939 and comes with a fixed-focus Eho Doplar lens that's fixed at F/11. The Eho Baby Box camera is made of metal with a leatherette covering and features a classic chrome ring around its face. The camera has a chrome lever on top that allows you to change the aperture from F/11 to F/22, based on the size of the aperture's opening.

Shutter speed “Z” slide, Cable release socket and shutter release

All of the other camera controls are on the right side of the Eho Baby Box camera. On the bottom right of the camera is a lever with a "Z". This is the shutter speed control. If the lever is pressed in, the shutter clicks at its normal speed. However, if pulled out, the camera can perform a timed exposure for as long as the shutter is depressed. Just above the "Z" lever is a cable release socket. If you plan to take a timed exposure, place the camera on a stable surface, as there is no tripod mount on the bottom, and hold the cable release in for the required exposure time.

It is odd to have a camera with a cable release socket, but no way to secure the camera on a tripod. Then again, the camera is tiny, and adding a tripod socket to the bottom would increase its size.

 Just above the cable release socket is the shutter release, which has a lined grip on the metal, making it easier to grip, especially when needed, as the lever is relatively small. Above the shutter release is one of the two waist-level viewfinder windows. The one on this side of the camera is for vertical, or portrait, images, and the one at the top of the camera is for horizontal, or landscape, images.

To open the camera to load film into it, you'll need to pull out two levers on the right side of the camera. Both levers are located closest to the separation between the front and rear of the camera. Pulling out the two tabs unlocks the front of the camera from the rear, exposing the area where you load the 127-size film. Take the empty spool from the bottom of the camera and place it in the top, which is now the take-up spool. Load the fresh roll on the bottom and pull the leader over the shutter area. Then, place the leader in the slot of the take-up spool.

 Put the back on the camera, and press the two clips to lock the front to the back. Wind the film until you see arrows or some indication that you're approaching the first frame. Wind slowly until you see the number 1 appear in the bottom red window. At this point, you're ready to take your first image. After taking the first picture, wind the film slowly until you see the number 1 in the top red window. This is when you're ready to take your second photo. Follow the same process with the number that first appears in the bottom red window, then in the top one, through number 8. After you take your last frame with the number 8 at the top of the window, wind the film to the end. The film should then be ready to be taped closed and processed.

My Results:

 Before inserting a roll of 127-size film into my Eho Baby Box camera, I tested the shutter. It clicked 9 out of 10 times, so I was confident that even though the camera would miss a frame or two, I'd have enough images from a roll of film to pick four or five to put in the blog post.

 After taking my first image, which required me to click the shutter release twice to capture a photo, the camera refused to cooperate for most of the roll. On the times the shutter didn't fire, I did notice that the shutter would partially open, but not fully, so the film was only getting a small sliver of light through a portion of the lens. This happened for the majority of the roll of film, and I managed to capture only 2-3 fairly good images from it.

 Here are the results of the better images taken:

Conclusion:

 To say I was a bit disappointed is an understatement. I'm more upset that the camera's shutter messed up during the shoot, and when I see how nice the two good images are, it would have been great to have 12-13 more to choose from for the article.

 Overall, the good images are pretty good, so if the shutter were in good working order, the camera would have been enjoyable to carry around or put in your pocket and travel with. It's small, a pocketable camera, and produces nice images; you don't have to worry about a tear in the bellows like with other pocket cameras.

 It's certainly a great camera to have in the collection, and a good step from the subminiature style of cameras and the folding pocket cameras. I like the camera and am happy to have it, although I'm frustrated by the timing issue with the shutter not working.

 Click on the link to see my other Cameras Reviews.

 If you'd like to browse some of the cameras, lenses, and accessories I have for sale, please visit my eBay store at Cuny's Camera and Photo.

 Thank you for taking the time to read about this tiny gem of a camera. 

 Until next week, please be safe.

 

Merlin Camera

My Merlin camera.

This week's posting is about a relatively uncommon camera with an odd and unusual look made by a tiny company in the UK. The camera is the Merlin, produced by United Optical Instruments in Southend-on-the-Sea, England. 

 I had seen the Merlin camera in books and online when looking at subminiature cameras. Still, it wasn't until my wife. I was on a trip to London a couple of years ago when I came across this odd bird at the Camera’s London stall on Portobello Road on a day that my wife and I were scheduled to go home. 

 Our flight wasn't until later in the afternoon, and I wanted to look for cameras before leaving, so I went there early in the morning to make it back in time to go to the airport. That's where I spotted the Merlin camera and a few other cameras I brought back to the States with me.

 What caught my eye about the Merlin camera is the very odd shape of the camera. It has a wide part of the body, then narrows down, but the lens area flares out again, and the winding knob is on the bottom of the camera. You need to display the camera on the side unless you rest the camera on something due to the winding knob on the bottom of the camera. It just doesn't sit evenly on a flat surface.

The Company:

United Optical Instruments is only known to have made two different cameras, and neither was very popular. One of the cameras they manufactured was the Jupiter camera, a simple plastic camera with an Art Deco faceplate that took 127-size film. The only controls on the camera were two shutter speeds, the winding mechanism, and the shutter release. The other camera they manufactured was the subminiature Merlin camera. 

ERAC Camera

 I can find little information about United Optical Instruments, which is located in a resort town on the Thames Estuary in Essex, southeast England, about 68 kilometers from London. However, I did find that the company was associated with the Erac Selling Company.

 The Erac Selling Co. manufactured and patented two slightly different, oddly shaped cameras that resembled a pistol made from thermoplastic material. One of the items was the Erac Automatic Pistol Camera, and the other was the Erac Mercury 1. These pistol-shaped cameras housed a Merlin camera without the viewfinder inside the pistol's body. When you pulled the pistol trigger, the camera took the photo. 

 According to the information I found online, the Erac is described and illustrated in a patent issued to Harry Steward of Southend-on-Sea in 1931. The early version uses a different type of film advance, and the Merlin doesn't seem to be in this version.

 Harry Steward and Harry Covill were issued an improved patent in 1937. The second camera's patent described it as a pistol-shaped device. The patent drawings show it to resemble a Merlin camera inside, but there is no mention of Erac.

 Since the Merlin camera is inside the Erac Pistol camera, they patented a camera without the Merlin inside. Still, they found it too difficult to make it work. A few years later, they decided to put the Merlin camera inside the camera without the viewfinder.

The Camera:

As you can see in the photos, the camera is very small. It's only  2" wide, 2" deep, and 2" tall with finder up and 1.5" when it's down, and it only weighs 3.9 oz. The camera is made from cast metal and painted with a crackle finish, as the exterior has a rough surface. I can see areas where it's either chipped off or some flaked off. My Merlin camera is black, but they also have blue, green, and red cameras.

 The Merlin took a special film of only 20mm rolls with a negative size of 18x18mm. It came on paperback rolls similar to the small "hit" style cameras, and to load the camera, the top of the camera, which is attached to the back, slides off, exposing the film chamber. Put in the roll of film, bring it over to the take-up spool, slide the top back on, and advance the roll to the first frame. The winding knob is on the bottom of the camera, as I mentioned earlier.

 Another slight issue is that the top of the body doesn't lock, so if the camera falls, the top can slide off, exposing the film. Unfortunately, my camera doesn't have any original fill spools, only the blank areas where the film goes.

The bottom of the Merlin camera.

 There is only one shutter speed, and the shutter release is on the bottom of the camera along with the film advance knob. The only item on the top of the camera is the fold-down viewfinder. The lens has no focus as it's a meniscus-style lens.

Conclusion:

Since I didn't have the film for this camera, I couldn't take it out for a walk through the neighborhood to take photos and see how it did. That's OK. I can use other cameras to do that.

 I really like having this small camera in my collection, and now I want to find a Jupiter or Erac camera to add to it.

 Thank you for taking a few minutes from your day to read about this wonderful camera made almost 100 years ago by a very small company in England. It has a nice place in my collection and hopefully inspires you to find one for it, too.

 I'd love to hear from you if you have questions, comments, or concerns about this or any of the cameras I've written about.

 Until next week, please be safe.